Browse Categories

 

Shopping Options

Browse by Brands
CALIX
CANOR
CODA

 
 
Denon POA-3000
Denon-POA-3000-1
 
Denon POA-3000Denon-POA-3000-1
Denon POA-3000Denon-POA-3000-2
Denon POA-3000Denon-POA-3000-3
Denon POA-3000Denon-POA-3000-4

STATUS - SOLD
Click here for more pictures

Description :
The Denon POA-3000 was built when Denon was gaining fame in the 80's and their products were highly regarded. It is a solidly built and magnificent amplifier, and its outer design is stripped to its bare necessities without unnecessary functions, having two large meter readings and a power switch. The Denon POA-3000 power amplifier is among the first series of Denon audio products designed and built in line with the guiding concept of REAL TIME AUDIO TECHNOLOGY, a new term signifying Denon's new approach to reproduction of real music. The POA-3000 is a new Class-A amplifier unit in which the inherently low efficiency associated with Class-A is eliminated by advanced design features involving 20 patents pending. Thus, it is capable of high-output operation without sacrificing the advantage of Class-A mode which includes wider audio band coverage with distortionless amplifying action.


Freedom from crossover distortion and switching distortion is accounted for by Class-A, and high output by the new scheme called "real bias circuit" that successfully endows Class-A with high efficiency. Seven of the 20 pending patents reside in this circuit. Also, ten power transistors with improved characteristics in the upper frequency range are used in 2 parallel rows of 5 transitors each to constitute the power stage. The power stage highlights broader bandwidth, minimized distortion, and excellent linearity particularly in high-out operation with higher frequencies. The power stage is also protected by small-signal transistor to form a cascode emitter-follower drive circuit for none distortion broadband to prevent the high-frequency characteristics from deteriorating due to junction capacitance in power transistors.

Rated at 180W Class-A, the Denon POA-3000 can be matched perfectly with the Denon PRA-2000 preamplifier to produce a beautiful and clear sound that makes music a joy to listen to. Different pitches and instruments of the performance can be discerned easily and the music passage are not muddled up in a cacophony. The Denon POA-3000 is becoming a very rare piece of equipment and it is no doubt a true statement piece for audiophiles.

Specifications :
Music Power...................................250 watts + 250 watts (8 ohm load)
Rated Output..................................180 watts + 180 watts Class A, 20Hz to 20kHz
Total Harmonic Distortion.................0.002% or less (20Hz to 10kHz)
                                    ..................0.003% or less (20Hz to 20kHz)
Cross Modulation Distortion..............0.003% or less (At the time of 180 watts equivalent)
Output Bandwidth............................5Hz to 100kHz (THD 0.02%) (IHF, both channels driven)
Input Sensitivity/Impedance..............1V/50k ohms
Output Load Impedance...................0.04%(1kHz)
Dumping Factor..............................200(8 ohms, 1kHz)
Signal-to-Noise Ratio.......................122dB or more (IHF-A)
Speaker Terminals...........................One system; 8 ohm for optimum load impedance
Transmission Characteristic.............1Hz to 350kHz, +0dB to 3dB
Subsonic-Filter Characteristic...........16Hz, 6 dB/octave
Separation......................................100dB or more (20Hz to 1kHz)
               .......................................85dB or more (-20kHz)
Slew Rate.......................................More than +/-300V/microsecond
Frequency Response.......................10Hz to 100kHz, +/-3dB
Level Meter Characteristic.................Indicating type: Peak value indicating type output level meter
                                    ..................Indicating range: -50dB to +5dB and 0dB=200 watts/8 ohms
Power Supply Voltage......................230V, 50Hz
Power Consumption.........................220 watts (Idle)
                             .........................1300W (Max)
Dimensions(w x d x h)......................49.5 x 46 x 19 cm
Weight............................................32kg


Miscellaneous :
Matching.........................................Denon DCD-3500RG Cd Player
             .........................................Denon PRA-2000 Pre-Amplifier
Made In...........................................Japan
Condition.........................................8/10 (Small chip at glass on the panel right side)


Product Information :
http://audio-database.com/DENON-COLUMBIA/amp/poa-3000-e.html

Reviews :
http://www.hifivision.com/amplifiers/12435-vintage-denon-amp-poa-3000-a.html
http://www.audiokarma.org/forums/showthread.php?t=5011

 

 
 
Copyright © 2013 listeninn.com. All Rights Reserved.

Hifi Singapore | Hifi Malaysia | Singapore Hifi Products | Malaysia Hifi Products | Hifi Audio | Stereo Hifi | Used Audio Equipment | Used Hifi Equipment | New Audio Equipment | New Hifi Equipment | Used Hifi | Audio System | Home Entertainment | Home Theatre | Hifi Music | Computer Audio | Singapore & Malaysia Hifi