STATUS - SOLD
Click here for more pictures

Description :
Accuphase proudly presents the Accuphase E-406 based on extensive experience in building superb separate-type amplifiers. The E-406 integrated amplifier destined to become a new reference. Using only the finest of parts, the E-406 delivers sound quality on a truly high level. The tape enthusiast will welcome provisions for two tape recorders, with easy dubbing in both directions. Summing active filter type tone controls and loudness compensation are further advantages. High-performance logic relays are used for signal switching, and a supplied remote commander lets the user operate the unit from any point in the room. The E-406 is an integrated amplifier with a full complement of features and simply great sound.

Specifications :
Continuous Average Output Power..............250 W per channel into 4 ohms
                                                               ..............170 W per channel into 8 ohms
                                                               ..............(Both channels driven,
                                                               ..............20 to 20, 000 Hz, THD 0.02%)
Total Harmonic Distortion...............................0.02% with 4 to 16 ohms load
                                               ...............................(both channels driven, from 
                                               ...............................0.25 watts to rated continuous
                                               ...............................average output, 20 to 20,000 Hz)
Intermodulation Distortion...............................0.01%
Frequency Response :
Main Amp Input..................................................20 to 20,000 Hz, +0, -0.2 dB
                            ..................................................(for rated output)
                            ..................................................2 to 150,000 Hz, +0, -3.0 dB
                            ..................................................(for 1 watt output)
High Level Input.................................................20 to 20,000 Hz, +0, -0.2 dB
                             .................................................(for rated output)
Low Level Input..................................................20 to 20,000 Hz, +0.2, -0.5 dB
                            ..................................................(for rated output)
Damping Factor.................................................120 (8-ohm load, 50 Hz)
Maximum AD Input Level (1kHz, THD 0.005% (REC OUT)) :
MM Input..............................................................300 mV rms
MC Input..............................................................8.0 mV rms
Maximum AD Input Level (1kHz, THD 0.005% (REC OUT)) :
MM Input..............................................................300 mV rms
MC Input..............................................................8.0 mV rms
Input Sensitivity and Impedance :
AD Input (MC).....................................................0.15mV, 0.011mV, 100 ohms
AD Input (MM).....................................................4.65mV, 0.35mV, 47 kohms
High Level Input.................................................147mV, 11.2mV, 20 kohms
Balanced Input...................................................147mV, 11.2mV, 40 kohms
Main Amp Input...................................................1.47V, 112mV, 20 kohms
Rated Output Level and Impedance :
Pre Output............................................................1.47 V at 50 ohms
Tape Rec Output.................................................125 mV at 200 ohms
                              .................................................(from AD input)
Gain :
Main Input -> Output...........................................28 dB
High Level Input -> Pre Out...............................20 dB
AD Input (MM) -> Tape Rec Output..................30 dB
AD Input (MC) -> Tape Rec Output..................60 dB
Tone Controls : (Turnover Frequency and Adjustment Range)
Bass......................................................................300 Hz +/- 10 dB (50 Hz)
Treble....................................................................3 kHz +/- 10 dB (20 kHz)
Loudness Compensator Characteristics......+6 dB (100 Hz)
                                                                          ......(Volume control setting -30 dB)
Signal-to-Noise Ratio and Input-Converted Noise :
Main Input..............................................................130 dB, -127 dBV, 108 dB
High Level Input...................................................113 dB, -130 dBV, 84 dB
Balanced Input.....................................................90 dB, -108 dBV, 84 dB
AD Input (MM)........................................................90 dB, -137 dBV, 80 dB
AD Input (MC)........................................................75 dB, -151 dBV, 80 dB
Subsonic Filter Characteristics :
Cutoff Frequency..................................................17 Hz, -12 dB / octave
Power Level Meters..............................................Logarithmic compression,
                                    ..............................................peak reading meters,
                                    ..............................................dB and direct watt-reading
                                    ..............................................(8-ohm load) scale
Output Load Impedance......................................4 to 16 ohms
Stereo Headphones:
Suitable Impedance..............................................4 to 100 ohms
Power Requirements...........................................100V, 120V, 220V, 230V, 240V,
                                       ...........................................(Voltage as indicated on rear panel)
                                       ...........................................AC, 50/60 Hz
Power Consumption.............................................65 watts at zero signal input
                                      ............................................390 watts in accordance with IEC-65
Supplied Remote Commander RC-10 :
Remote Control Principle.....................................Infrared pulse
Power Supply..........................................................3V DC (IEC R03 batteries (size AAA) x 2)
Weight.......................................................................190g (0.32 lbs.) (including batteries)
Dimensions.............................................................66 mm (2-19/32 inches) width,
                       ............................................................175 mm (6-7/8 inches) height,
                       ............................................................20 mm (25/32 inches) depth
Weight.......................................................................29kg
Dimensions(w x d x h)...........................................48 x 42.5 x 18 cm

Miscellaneous :
Matching...................................................................Accuphase DP-55 CD Player
XLR Input..................................................................Yes
XLR Output...............................................................Yes
Remote.....................................................................Yes
Manual.......................................................................Yes
Made in......................................................................Japan
Condition...................................................................8/10 (Good condition)

Product Information :
http://audio-database.com/Accuphase-kensonic/amp/E-406-e.html
http://www.accuphase.com/cat/e-406en.pdf

Reviews :
http://www.audioreview.com/cat/amplification/integrated-amplifiers/accuphase/e-406/PRD_115519_2717crx.aspx