STATUS - SOLD
Click here for more pictures
Description :
The McIntosh C32 stereo pre-amplifier is born from traditional craft Manship who does not allow compromise. The output of 12W+12W is obtained to a loudspeaker connecting terminal on the back, and a drive of an X-tend speaker system is also possible by the combined use with an input selector switch. Moreover, a front headphone jack can be driven also by a dynamic type and capacitor type, and carries the volume for exclusive use.
Specifications :
Frequency response.........................20 to 20kHz (+0 -0.5dB).
Distortion.........................................0.05%.
Noise and hum.................................-90dB aux, -80dB phono.
Output rated.....................................2.5v.
Output impedance............................220 ohms.
Load impedance...............................5k.
Input sensitivity and impedance.........aux 0.25V at 50k, phono 2mV at 47k and 65pF.
Program equalizer............................30, 150, 500, 1500 and 10,000Hz boost or cut 12dB.
Headphone amplifier.........................12W/ch into 8 ohms at 0.1% distortion.
LF filter............................................50Hz at 12dB/octave.
HF filter...........................................7kHz at 12dB/octave.
Voltage gain....................................20dB aux, 62dB phono.
Weight............................................27 lb.
Dimensions(w x d x h)......................16 x 13 x 5-7/16 inch
Front Panel:
- Glass panel. Illuminated.
- Listen selector: aux, tuner, tape 1, tape 2, tape 3, phono.
- Mode selector: L to L+R, R to L+R, stereo rev, stereo, mono (L+R), L+R to L and L+R to R.
- Program equalizer: 30, 150, 500, 1500 and 10k,
- Volume, Record selector: aux, tuner, tape 1, tape 2, tape 3, phono.
- Pushbutton switches with indicator lights: phono 1 or 2, record monitor, EQ out, LF and HF filter: in or out, speaker/output 1 and 2: in or out.
- Power: on or off. Headphone jacks, Tape 3 input and output jacks.
- Expander control: 1.0 to 2.0 with on-off switch, Balance, Loudness.
Top Panel:
- Monitor amplifier controls: left and right gain, input switch: record or listen.
- Expander controls: level match, speed: fast, norm and slow.
Back Panel:
- Outputs: 1, 2, main, line, tape 3, tape 2, tape 1, Monitor amplifier speaker push terminals. Speaker control relay socket.
- Inputs: tape 3, tape 2, tape 1, tuner, aux, phono 2, phono 1.
- Ground binding post.
- AC outlets: 4 switched, 2 switched (turntable auto-on).
- Auto-manual switch.
- Fuses: turntable and main.
- Panloc mounting.
Miscellaneous :
Made in............................................USA
Sold from..........................................1977-1981
Condition..........................................7 / 10 (Bubbles at front panel)
Product information :
http://www.roger-russell.com/preamps.htm#c32
http://audio-database.com/MCINTOSH/amp/c32-e.html |