STATUS - AVAILABLE
Click here for more pictures

Description :
Handsomely styled, the Goodmans 150 receiver is very impressive even in the 1970s. Its a real achievement that takes its place flawlessly at the heart of any high fidelity system. High output power with low distortion, push-button selection of 7 pre-tuned FM stations, facilities for two tape recorders, electronic output protection, four speaker surround sound, and more, makes this receiver's performance outstanding and a delight to use. A surround sound feature allows the user to enjoy enhanced realism of broadcast material without interference or distortion. It's claimed that these receivers were used by the BBC to monitor the quality of transmissions.

Specifications :
Audio:
Power output..........................................110 W per channel into 4 ohms
                   ..........................................70 W per channel into 8 ohms
Total harmonic distortion..........................0.02% for 100 W into 4 ohms or 60 W into 8 ohms
Total music power...................................275 W into 4 ohms
Preferred loudspeaker impedance.............8 ohms, for the simultaneous use of 2 pairs
Frequency response...............................+0, -3dB at 20 Hz and 30 kHz
Power bandwidth.....................................10 Hz to 30 kHz
Output impedance...................................Less than 0.2 ohms
Damping factor........................................50 into 8 ohms
Sensitivity (1 kHz for maximum output)......Magnetic pickup: 2 mV into 50 kohms
                                                        ......Auxiliary tape 2: 50 mV into 500 kohms
                                                        ......Tape: 100 mV into 50 kohms
Overload capability..................................38dB (any input)
Tape output (40 kHz deviation on FM)........Phono line socket: 250 mV into 100 kohms
                                                      ........DIN - High level socket: 50 mV into 10 kohms
                                                      ........DIN - normal level socket: 8 mV into 10 kohms
                                                      ........Auxiliary (tape 2): 8 mV into 10 kohms
Tone controls (reference 0 dB at 1 kHz).....Bass:±12 dB at 50 Hz
                                                         .....Treble:±12 dB at 15 kHz
Loudness countour (at -30 dB)..................+9 dB at 50 Hz, +6 dB at 15 kHz
Scratch filter...........................................-3 dB at 7 kHz, -20 dB at 20 kHz
Rumble filter...........................................-3 dB at 60 Hz, -20 dB at 25 Hz
Hum and noise (unweighted).....................Tape inputs: -80 dB
                                         .....................Magnetic pickup input: -70 dB
                                         .....................Auxiliary input: -80 dB
Crosstalk (any input)................................-50 dB
Radio - FM:
Frequency coverage..................................87.5 MHz - 108 MHz
Sensitivity (for 30 dB signal/noise ratio........Less than 1 µV into co-axial input
                                                       ........Less than 2 µV into balanced input
Capture ratio............................................Better than 1.5 dB
Signal/noise ratio (for 1 mV input)...............70 dB
Image rejection.........................................75 dB
Spurious rejection.....................................80 dB
IF rejection...............................................90 dB
Stereo separation......................................40 dB at 1 kHz
Pilot tone rejection....................................Better than 65 dB
Pilot harmonic rejection.............................Better than 75 dB
Overload capability....................................120 dB above 1 µV input
Distortion..................................................0.5% THD mono or stereo for 67.5 kHz deviation
Radio - AM:
Frequency coverage...................................Long wave 148 kHz - 350 kHz
                             ...................................Medium wave 520 kHz - 1625 kHz
Sensitivity (for 20 dB signal/noise ratio)........MW -20 µV
                                                        ........LW -40 µV
Image rejection..........................................65 dB
AGC range................................................80 dB
General:
Mains input................................................120, 220 or 240 V, 50 - 60 Hz
Power consumption....................................440 W maximum
Transistor complement................................114, including 4 ICs, 4 Varicap silicon diodes, 4 FETs
Dimensions(w x d x h).................................55 x 36 x 19 cm
Weight.......................................................18 kg

Miscellaneous :
Made in......................................................UK
Condition....................................................8/10