STATUS - SOLD
Click here for more pictures
Description :
The Electrocompaniet ECI 3 is a DC coupled, high performance, fully balanced, remote controlled integrated stereo amplifier. It features one balanced XLR input, six single-ended RCA inputs, a balanced output, and a single-ended tape output. The ECI 3 is equipped with a balanced, motorised volume control without sonic degradation, and all input switching is done by relays. Volume up/down and input selection can be controlled using the four Navigator touch buttons on the front panel, or from the remote control. The selected input source is shown in the Navigator Window.
The ECI 3 features Electrocompaniet’s unique Floating Transformer Technology (FTT) power supply which is capable of delivering twice as much current as conventional designs. The ECI 3 is built with the same quality components as our most prestigious models. A 550 VA transformer, in FTT configuration, and a current reservoir of 40.000uF delivers 2 x 70 W of clean and powerful dynamics into an 8? load. Like all our amplifiers, the ECI 3 is stable in all loads down to 0.5 ?. The balanced output of the ECI 3 can feed an additional power amplifier in a bi-amped set-up.
Specifications :
Preamplifier section
Nominal Input impedance....................330 kohm
Max. input level..................................> 10 Volt RMS
Equivalent input noise.........................< 4 µV
Input sensitivity..................................for rated output (single) 0.6 V
Input sensitivity..................................for rated output (balanced) 0.3 V
Amplifier section
Output Impedance.............................(20 Hz - 20 kHz) < 0,01 ohms
Max. peak current..............................> 60 A
THD.................................................(measured at 1 kHz half power,8W) < 0,005 %
THD.................................................(measured at 1 kHz -1 dB 8 W) < 0,006 %
Rated output power
8 ohms.............................................2 x 70 W
4 ohms.............................................2 x 120 W
2 ohms.............................................2 x 160 W
Power consumption...........................(no load or signal) 70 W
Weight.............................................12 kg
Dimensions(w x d x h).......................48.5 x 41 x 11.5 cm
Miscellaneous :
Made in............................................Manufactured by ElectroCompaniet Norway
XLR Inputs and Outputs.....................Yes
Manual.............................................Yes
Original remote..................................Yes
Condition..........................................9 / 10 (Good condition)
Product information :
http://www.electrocompaniet.no/products/integrated/eci3.html
http://www.electrocompaniet.no/pdf/manualer/eci3%203.pdf (Online manual)
Reviews :
http://www.audioreview.com/cat/amplification/integrated-amplifiers/electrocompaniet/eci-3-/PRD_115783_2717crx.aspx |
